Skip to content

Stone Floors – The Nine Myths About Stone Restoration

There are three primary stone finishes, polished, honed and flamed. In addition there are many others available. The following content works through these finishes to provide you with informative detail of this enlightening topic. What stone finishes are available?

A polished finish displays glossy surface that reflects light and emphasizes the color and markings of materials. It is created by buffing the surface from the stone until it reaches its most refined stage. The surface pores become sealed, making the stone nearly impervious to weather and chemical wear.

A honed finish is often a satin-smooth surface which shows the full colour for this stone with relatively little reflection of light. System the same procedure used to polish, but the honing process ends before the buffing stage. Generally, a honed finish is preferred for floors, stair treads, thresholds, and other locations where heavy traffic will wear off the polished finish. A honed finish may also be come with furniture tops and other surfaces.

A flamed finish is produced when an intense flame is fired at the stone, causing the surface to burst you can also be rough. Cool water is applied equally well. It is used frequently on granite tiled floors, where slip-resistance is extremely imperative. It cannot be added to all stone, most granite and certain hard limestone very best suited.

A leathered finish is the associated with texturing granite or marble to appear less glossy. This technique amplifies the natural characteristics of granite or marble, contributing to an exquisite appearance. It is easy totally clean and maintain, too as, pleasing towards the touch; a perfect balance between style and practicality.

In sandblasting, a high-pressure jet of siliceous sand or steel shots is used to the area to be treated. This treatment produces a smooth abrasion, leaving totally with a slightly scratched (but not rugged) surface. This dulls the colour, tones and veins.

Splitface finish is really a result of stone being cut a new guillotine, fracturing the face of the stone turning it to your rocky look. It is a rugged, uneven, concave-convex finish that reveals reflections originating from a crystals.

Rigato is a product finish that gives a linear pattern cut to the stone. This finish gives an extra design factor when applied to a wall. All stones can have this finish applied to them.

Natural Cleft is a finish is along with materials that are layered and thus, when split, go up on a healthy fault creating what may be known as a herbal cleft finish. Slates are one of the most common epidermis stone just take split by nature.

A flamed and brushed finish is obtained by passing a blowpipe that emits a high-temperature the actual years surface, which blows urates out since they suffer thermal shock, by effect with regard to particularly good on huge majority of granites. The resulting surface is rough, non-slip and generally faded in colour, hiding defects and tone variance. Due to oxidation, yellow materials become red or blue.

A bush-hammered finish is produced by a specialized stone-working hammer by using a head that resembles a meat tenderizing hammer. As the head from the hammer commonly small (about 1-2 inches square) it requires a long time to apply this finish to a large surface position. The result leaves the surface of the stone fairly smooth with small indentations. This finish can be applied to just about all stones.

The sheer array of finishes available for stone tiles show the individuality that could be created through tailored design. Your stone floor restoration specialist will means to offer valued information and advice that will deliver a stone finish that is best-suited with the individual personal needs.

Prestige Stone Restoration

+61 408 717 883

Gold Coast QLD, Australia

https://goo.gl/maps/JtKGvDWG2yJ2